Global Precision Machinery Ltd

Danfoss valve

The installation of Danfoss solenoid valve

1. During installation, the arrow on the valve body shall be consistent with the flow direction of medium. Do not put it in the place with direct dripping or splashing. The solenoid valve shall be installed vertically upward;
2. The solenoid valve shall ensure normal operation within 15% - 10% of the rated voltage fluctuation range of the power supply voltage;
3. After the solenoid valve is installed, there shall be no reverse pressure difference in the pipeline. It needs to be electrified several times to make it warm before it can be put into use.
4. Clean the pipeline thoroughly before installing the solenoid valve. The introduced medium shall be free of impurities. Install filter in front of the valve;
5. In case of failure or cleaning of solenoid valve, bypass device shall be installed to ensure continuous operation of the system.

DANFOSS FLUID POWER VALVE 982006-U, 1A32-R6-60SV
Danfoss
982006-U,
Danfoss AKV 10-3 Electronic Expansion Valve (068F1167)
Danfoss
10-3
Danfoss EVR 20 Refrigeration Solenoid Valve Body
Danfoss
20
Danfoss PN/ 068N1014 Thermostatic Expansion Valve
Danfoss
068N1014
Expansion Valve R448A/R449A TE2 068Z3730 Danfoss expansion valve
Danfoss
R448A/R449A
◂ Previous page
All Products Contact Now
Product Categories
Parker valve
Danfoss pump
Parker motor
JAF bearing
DAIKIN valve
Rexroth valve
FAFNIR bearing
Barden bearing
TOKIMEC valve
TOKIMEC pump
Rexroth pump
Danfoss valve