Global Precision Machinery Ltd

Danfoss valve

The installation of Danfoss solenoid valve

1. During installation, the arrow on the valve body shall be consistent with the flow direction of medium. Do not put it in the place with direct dripping or splashing. The solenoid valve shall be installed vertically upward;
2. The solenoid valve shall ensure normal operation within 15% - 10% of the rated voltage fluctuation range of the power supply voltage;
3. After the solenoid valve is installed, there shall be no reverse pressure difference in the pipeline. It needs to be electrified several times to make it warm before it can be put into use.
4. Clean the pipeline thoroughly before installing the solenoid valve. The introduced medium shall be free of impurities. Install filter in front of the valve;
5. In case of failure or cleaning of solenoid valve, bypass device shall be installed to ensure continuous operation of the system.

Solenoid Valve Danfoss EVR10S-5/8
Danfoss
EVR10S-5/8
Manual radiator valve danfoss 1/2" angle 194z2251
Danfoss
1/2"
DANFOSS VACUUM ANGLE VALVE DN25 (1") VV243B25AL
Danfoss
DN25
Solenoid valve danfoss ev220w 14b G 12n nc000
Danfoss
ev220w
NEW DANFLOSS THERMOSTATIC EXPANSION VALVE 067B3380 TES5, R404A/R507, 400 PSI
067B3380
1 pcs
New Listing1 NEW DANFOSS 032F1275 CAPACITY REGULATOR UNLOADING VALVE
Danfoss
Listing1
DANFOSS THERMOSTATIC VALVE FJVA25 * NEW IN BOX *
Danfoss
FJVA25
Danfoss Ball Valve 009G7052 Straighway 1/2
Danfoss
009G7052
Danfoss AKV 10-2 Electronic Expansion Valve (068F1164)
Danfoss
10-2
*New Danfoss HSV3B 22 3 Way Valve (Only) 22mm
Danfoss
HSV3B
Next page ▸
All Products Contact Now
Product Categories
Parker valve
Danfoss pump
Parker motor
JAF bearing
DAIKIN valve
Rexroth valve
FAFNIR bearing
Barden bearing
TOKIMEC valve
TOKIMEC pump
Rexroth pump
Danfoss valve